How To Use A Ratchet Screwdriver? 6 Steps!!!

How To Use A Ratchet Screwdriver

A ratchet screwdriver can add a vibe to your toolbox undoubtedly. Using a ratchet screwdriver, your job will become faster and easier than before. The force that is placed on your wrist can also be cut with a ratchet screwdriver.

If you select the best ratchet screwdriver with a perfect bit, it can gain the place that your full screwdriver set has taken.

Moreover, using this screwdriver is straightforward. Also, to purchase a ratchet screwdriver, you don’t need to break the bank.

A ratchet screwdriver can give you the right advice at the right moment within a couple of minutes. Today, I want to share an article about “How to use a ratchet screwdriver?”

This article will give you a complete sense of knowledge about a ratchet screwdriver to make your job perfect. Let’s go to the point without delay.

What is a Ratchet Screwdriver?

What we saw in the traditional screwdriver is, for screwing and unscrewing, we need to reposition our hand for another turn. For this, we need to remove the head of the screwdriver from the screw’s slot.

But with the ratcheting screwdriver, you can perform this action without removing your hand from the screwdriver’s head.

This unique feature is placed at the handle of the ratchet screwdriver, and due to this feature, a ratchet screwdriver is unique from other screwdrivers.

Even during an operation with a ratchet screwdriver, releasing the pressure is unnecessary. So, you may be thinking about how to perform the next twist then. All you need to do is twist your wrist counterclockwise. Isn’t it simple?

When you give a counterclockwise twist, the handle turns, but the shaft remains stable. Using this mechanism, a ratchet screwdriver allows its user to perform screwing and unscrewing.

When you are working on wood, a ratchet screw will be the best solution to accomplish your task, undoubtedly. Ratchet screwdrivers efficiently save the user’s time by reducing additional operation.

 Mechanism of Using Ratchet Screwdriver 

Mechanism of Using Ratchet Screwdriver

Step 1: Purchase a wide range of bits

A wide variety of bits is inevitable for a ratchet screwdriver. Flathead, Philips, and square drive bits will ensure that you can handle any task that you encounter, whatever the task it is. Also, confirm that you have available sizes for every style.

Step 2: Inserting a bit

You will find that the majority of your bits are double-handed, and each side contains a different tip.

If you want to insert a bit in the right way, grip it in the middle of your thumb and forefinger. Then, gently press the tip into the hole of the screwdriver.

The maximum ratchet screwdriver contains a magnet that assists in holding the tip in place. Some designs also have where you need to twist the bit until the bit gets tight.

Step 3: Changing the bit

Removing a bit from a ratchet screwdriver is simple. Take the screwdriver in the middle of your thumb and forefinger and pull the bit severely.

At the maximum time, the bit comes out easily. But if it doesn’t come, there is no need to worry. To remove the bit smoothly, ensure your hands are not wet due to sweat.

Sweats are responsible for this type of problem that you are losing your grip on the metal. So, wipe out your fingers, confirm your fingers are sufficiently dried, and if required, use a cloth in your hand to remove the bit.

Once you can remove the bit, select another bit for the replacement.

Step 4: Press the ratchet tab down. 

Do you know what the best feature of a ratchet screwdriver is? The ratchet itself. A ratchet screwdriver allows you not to adjust your wrist every time, as well as consistent performance.

When you put a screw into a surface, the handle itself will turn. Without any hassle, you will get a much quicker and flatter process using a ratchet screwdriver.

While operating with a ratchet screwdriver, you need to make sure you are using the correct size of the tip on the head of the screwdriver.

Three positions are available in the ratchet head. To drive a screw into a surface, press the tab so that it can go all the way down, in the direction of the blade, and begin to turn.

As soon as the wrist is gone, twist the driver in your direction to you. The blade will remain stable, and the handle will move back. Continue running the screws the entire way without providing any additional effort.

Step 5: To remove, pull out the tab.

Unscrewing is also pretty simple. Similar to before, set your bit into the head. But this time, you need to be cautious enough to tweak the ratchet driver head in your direction.

Follow counterclockwise to turn the handle. Till the time the screw comes all the way out, stop then only.

Step 6: For an old-fashioned driver, use the middle setting

As I stated earlier in step 04, on this tool, you will find a total of 3 tab settings. So, are you thinking about what could be the third set?

If you want your driver to perform like a regular driver, keep the setting at the middle point; at this point, the blade will remain fixed.

Once you are familiar with the earlier two settings, you will never use the screwdriver using this setting. But it is important to know about this set.

How To Use A Ratcheting Screwdriver-Easy Tutorial


It would be best if you kept a special note that all ratcheting screwdrivers are not built in the same way. The Ratchet screwdriver, which has a minimum of 20 teeth, is a right ratchet screwdriver. The best ratchet screwdriver contains 30 teeth.