How to Use a Hole Saw? (7 Easy Steps)

How to Use a Hole Saw

As chop saws, hole saws are also used widely since they make things very easy. The main aim of the hole is to create different sizes of holes in different materials. If you are a professional carpenter or a DIYer, then a hole saw can be very beneficial for you.

People who have been into the carpentry market they know about all the saws and know how to use them as well. Then why are we here today?

This very guide is for the newbies who want to enter the carpentry industry or want to complete their first DIY project of life. Does your work require making holes into materials?

If yes, then you must read this article. Here, we are going to teach you how to use a hole saw effectively.

Roll your eyes below!

Learn How to Use a Hole Saw

Learn How to Use a Hole Saw

We have designed the entire process in steps so that you can understand and learn pretty easily. But before we dive into the using process, there is something very important to talk about.


The most important thing to think about whenever you are doing anything. Since we are here for the hole saw, let’s talk about that.

Hole saws are highly dangerous if not used in the right way. While drilling, there are a lot of things that need your attention. Drilling looks pretty easy, but it is not as it looks.

Hitting a nail or tilting the drill during drilling can force the saw to bind. Also, the drill motor can twist very violently in your hands. We all know how powerful drill machines are, and the torque they produce is also powerful.

If you do anything wrong during drilling, because of the torque the drill can slam into your face and can injure your wrist. So we urge you not to overlook the safety when drilling.

Wear proper eye protective gear so that nothing goes into your eyes when you are drilling. Wear shock-resistant work boots and gloves. And do not start working with the drills, saws, or anything until you are not fully prepared.

We have listed a few things below. Take a look!

  • While drilling, make sure to let the drill go straight to avoid unexpected binding of the saw.
  • Do not do any drilling or sawing work wearing loose-fit clothing or jewellery. If somehow they entangle with the saw, you may pay a big price.
  • If you are sawing into loose material, make sure to attach two clamps at least to make that stable. Otherwise, the material will spin with the hole saw, and you might end up with a heavy injury.

 Step-by-Step Guide to Using a Hole Saw Effectively 

We hope you will remember the safety requirements before you get started with the sawing or drilling. However, with that said, let’s get to the main business. Here you go!

STEP 1: Choosing your Hole Saws

Step 1

There are different types of hole saws, and there are different types of materials. Each hole saw is suitable for different materials, so before you start making a hole into materials, make sure you are picking the right saw hole for the material.

Plus, pick the right size as well. If you will be making a hole into metal material, then keep lubricant or cutting oil beside you and then apply it to the hole saw blade so that it runs smoother.

STEP 2: Arbor For Hole Saw

Step 2

After that, you would want to pick the right arbor. There are mainly two types of arbors, one for small saws, which are between 14 to 30mm. And the second one is for the large saws, which are 32 to 210mm. Choose the right arbor size depending on your needs.

STEP 3: Attach The Arbor to a Hole Saw.

Step 3

Once you have picked the suitable arbor then insert it on the hole saw, insert it through the back of the saw. And screw the hole saw into the arbor thread, and keep screwing until it becomes tighter.

STEP 4: Fit The Arbor to a Drill Chuck.

Step 4

Now, you would want to insert the end of arbor into the chuck of the drill and tighten it enough to stay in place securely. If you want effective drilling, we suggest you use a power drill that comes with an 18-volt battery. This much volt is the least needed, otherwise, the drill won’t produce enough torque to drill effectively.

STEP 5: Drill A Pilot Hole

Step 5

Now mark the area where you want to make the hole. And then, make a pilot hole into the centre of the hole you will be making.

The pilot hole will help you to maintain accuracy. One important thing is that when you will be drilling, make sure you keep the drill bit level and square.

STEP 6: Prepare for Drilling

Step 6

Now it’s time to make the real hole. The very first thing you would want to do is place the tip of arbor drill into the pilot hole that you have made. Doing this will keep the saw aligned and will give you an accurate hole.

When drilling, ensure the drill teeth touch the material evenly from all sides. If you are making a hole into a metal material, add some oil or lubricant to the blade for smooth operation.

STEP 7: Use The Hole Saw

Step 7

Hold the drill securely with both of your hands and slowly start drilling. Be very gentle; do not over-squeeze the trigger.

While drilling, hold the drill with the material very tightly. To get a better finish, after drilling half from one side, try to do drilling from the other side as well. This should give you a pretty cool hole.

How to Use a Hole Saw | Ask This Old House


How do you attach a hole saw to a drill?

To attach a hole saw to a drill, first make sure the arbor (the small shaft in the center of the hole saw) matches the chuck size on your drill.

Slide the arbor into the drill chuck and tighten the chuck securely. It’s important to ensure the hole saw is centred and gripped tightly to prevent wobbling during use.

What type of drill do I use with a hole saw?

The best drills for a hole saw are variable speed, reversible drills with an adjustable clutch. The variable speed allows you to adjust RPMs for optimal cutting in different materials.

Reversible is important for clearing out plugs. The clutch helps prevent twisting if the bit jams. A 3/8″ chuck size or larger drill with at least 600 RPMs works well for most hole saws.

How hard is it to use a hole saw?

The keys are using the right drill, marking your hole location, and taking precautions against splintering. Start slowly with the saw perpendicular to the surface. Let the tool do the work, applying only light pressure.

Lubricating the cutting edges makes the operation smoother. With the right techniques, hole saws can drill clean holes in wood, metal, plastic and more.

How do you use a hole saw without a drill bit?

It is not recommended to use a hole saw without a drill bit installed. The flutes around the perimeter of the hole saw are designed to clear chips, not cut the hole.

The spur drill bit in the arbor cuts through the material first. Using a hole saw without a drill bit is unsafe and risks serious damage to the tool or material.


If you have learned from this article, tell others about how to use a hole saw. Knowledge not shared is a waste. You learn and then teach others. However, hope this guide did help you.